2. Workshop

The Bus

Read More
In order to get the guitars off the floor we added some hooks on the ceiling and rigged some bungees to hold them in place.
160 / 185

In order to get the guitars off the floor we added some hooks on the ceiling and rigged some bungees to hold them in place.

  • The mortises for the leg vise took me a few days to get right. This is the first time I've installed a vise like this, and there was quite a bit of testing and tweaking before I finally got it flowing smoothly, but once everything was right it became instantly amazing and might be my favorite thing about the whole bus.
  • The mortises for the leg vise took me a few days to get right. This is the first time I've installed a vise like this, and there was quite a bit of testing and tweaking before I finally got it flowing smoothly, but once everything was right it became instantly amazing and might be my favorite thing about the whole bus.
  • Since nothing is square of straight I worked pretty hard at figuring out exactly where my countertop should go using string and a bunch of tweaking. Eventually it went together fairly well.
  • Once the string tricks were done I cut the mortises into the top of the legs.
  • Here's the framework of the workbench all finished and ready for the countertop to go on. I ran a power plug to the front side which is accessible from my driver's seat where my desktop workspace is.
  • The face of the chop for the leg vise uses machine screws tapped directly into the wood, which I had never done before so that was interesting. I had to rework these a few times during the build of the chop but they never stripped out or showed any weakness at all.
  • My bench top bowed a little bit in the humidity before the install, so I made sure it stayed flat on the framework and glued it in place. Here you can also see the vise chop installed, but not shaped and finished.
  • With the rest of the workbench assembled it came down to shaping the vise chop. I did this partially with hand chiselling and partially with a belt sander, and left the top cut for after final assembly.
  • With the rest of the workbench assembled it came down to shaping the vise chop. I did this partially with hand chiselling and partially with a belt sander, and left the top cut for after final assembly.
  • Here's the new bench after completion and with the beginnings of the first drawer being laid out on top.
  • I made the two bottom drawers full width and then divided the upper section into six smaller drawers that I hung from the bench top on wood sliders instead of buying the metal hardware for everything.
  • Past me saved like $600 by NOT buying a router dovetail jig, so now I cut 48 dovetails by hand for my new workbench. Past me knew that this day would come and I'm pretty sure he laughed about it.
  • After hand cutting 48 dovetails and assembling the six upper drawers I cut dados down the sides with a dado blade on the table saw, and then added a coat of finish to everything and the drawers went into the bench.
  • Here's the workbench installed and filled full of tools. At this point I was able to get the old workbench out of the bus, which opens up a ton of space in the living room and makes things a whole lot more homey. We're packing up to move south for the winter now, so I left the drawer faces for later and just installed some scrap handles.
  • Here's the action on my workbench vise. I love it.
  • This is the beginnings of my fridge strap. I cut down a piece of oak to make a cam and a pair of braces.
  • I refined the edges of the cam to make a nice curve and then sanded all the edges.
  • With a bit of finish the fridge belt gets installed and functions perfectly first try!
  • Here's the finished fridge belt. A year and a half into the build we can finally stop using a board to hold the fridge in while driving.
  • In order to get the guitars off the floor we added some hooks on the ceiling and rigged some bungees to hold them in place.
  • No Comments
  • Photo Sharing
  • About SmugMug
  • Browse Photos
  • Prints & Gifts
  • Terms
  • Privacy
  • Contact
  • Owner Log In
© 2023 SmugMug, Inc.